It's time for you to become an expert in DIY plumbing, or at least know how to solve minor plumbing problems that may come up.
Save yourself hundreds of dollars by simply handling overflowing toilets or dripping faucets yourself.
When next you have a slowly clearing drain, don't waste your money on chemical drain cleaners which are rather expensive.
Hence, using a drain snake, you can unclog your drain manually.
Simply insert it into the drain and pull it back out, hopefully with the reason for the clog attached.
Also, in place of a drain snake, you can try to suck the clog out using a dry/wet shop vacuum.
Worn out flappers are commonly responsible for leaks between the toilet bowl and tank.
Furthermore, they cost only a few dollars.
Repairs on nearly all modern faucets can be done by having the entire interior replaced by a new cartridge.
Moreover, this can simply be done by removing one or two screws.
A dripping showerhead can easily be fixed with thread tape. The leaks most likely mean that the threads of the showerhead aren't tightly connected.
So, loosen the showerhead and wrap new thread tape on it in a clockwise direction, and then re-attach the showerhead to solve the issue.
If the showerhead is clogged, keep it soaked for an hour in a bowl of warm water mixed with vinegar.
Then, using a small brush, you can free up any mineral deposits which could cause clogging in the spray.
Thread sealing compound (otherwise called "pipe dope") can seep and smudge. Accordingly, thread tape can be more preferable for many DIY tasks around the house that involve pipe threads.
Roll the tape counter-clockwise round the threads. Then, if you are having difficulty getting to roll in a tight space, wrap some tape round a pen and roll from there.
In addition, you should wrap your tape round the pipe threads about three times.
Ensure to monitor the thermostat of your water heater such that it isn't too high. Even at 115 degrees, you should still be able to get sufficient hot water.
Deposits of hard water are formed by minerals contained in the water which accumulate gradually on plumbing fixtures.
Not only do deposits of hard water look terrible, they can also hinder the operation of your fixtures.
The unfamiliar taste or discoloration of your tap water can be associated with several issues, most of which relate with happenings in your property or city. Luckily, there are steps you can take to improve the quality of your drinking water, regardless of your location.
Many people prefer doing their own plumbing projects, either because they love to tinker around the house or to save some money. Though doing your own plumbing work can be beneficial, these common errors can result in far greater expenses.
It is easy to conclude that a toilet replacement should be done when you experience excessive trouble with it. Though it may be best to install a new toilet in some cases, it does not have to be your only option.
Water heater draining at intervals, between 6-12 months, is recommended by most water heater maintenance guides. This is advised so as to help take out any buildup or sediments collected at the water heater tank bottom.
There are some things homeowners with the right know-how can do themselves to make their plumbing better, not having to involve a plumber time and again. Plumbers possess their own plumbing secrets, so let’s take a quick look at some plumbing essentials you need to know.